//------------------------------------------------------------------------------
// File: EDevDefs.h
//
// Desc: External Device (such as a VCR) control interface parameter and
//       value definitions.  
//
//       Note:  new constants added:  ED_BASE+800L -> ED_BASE+811L
//
// Copyright (c) 1992 - 2000, Microsoft Corporation.  All rights reserved.
//------------------------------------------------------------------------------


#ifndef __EDEVDEFS__
#define __EDEVDEFS__


#define ED_BASE		        		0x1000L

// this is used to tell the device communications object which
// physical communications port to use.
#define DEV_PORT_SIM	1
#define DEV_PORT_COM1	2	// standard serial ports
#define DEV_PORT_COM2	3
#define DEV_PORT_COM3	4
#define DEV_PORT_COM4	5
#define DEV_PORT_DIAQ	6	// Diaquest driver
#define DEV_PORT_ARTI	7	// ARTI driver
#define DEV_PORT_1394	8	// IEEE 1394 Bus
#define DEV_PORT_USB	9	// Universal Serial Bus
#define DEV_PORT_MIN	DEV_PORT_SIM
#define DEV_PORT_MAX	DEV_PORT_USB


//	IAMExtDevice Capability Items:  unless otherwise specified, these items return 
//	   OATRUE or OAFALSE.  All return values are in pdwValue unless otherwise specified:

#define ED_DEVCAP_CAN_RECORD			ED_BASE+1L
#define ED_DEVCAP_CAN_RECORD_STROBE		ED_BASE+2L	// for multitrack devices: 
													// switches currently recording tracks off 
													// and selected non-recording tracks into record
#define ED_DEVCAP_HAS_AUDIO			ED_BASE+3L
#define ED_DEVCAP_HAS_VIDEO			ED_BASE+4L
#define ED_DEVCAP_USES_FILES		ED_BASE+5L
#define ED_DEVCAP_CAN_SAVE			ED_BASE+6L

#define ED_DEVCAP_DEVICE_TYPE		ED_BASE+7L	// returns one of the following:
#define ED_DEVTYPE_VCR				ED_BASE+8L
#define ED_DEVTYPE_LASERDISK		ED_BASE+9L
#define ED_DEVTYPE_ATR 				ED_BASE+10L
#define ED_DEVTYPE_DDR				ED_BASE+11L
#define ED_DEVTYPE_ROUTER 			ED_BASE+12L
#define ED_DEVTYPE_KEYER 			ED_BASE+13L
#define ED_DEVTYPE_MIXER_VIDEO 		ED_BASE+14L
#define ED_DEVTYPE_DVE 				ED_BASE+15L
#define ED_DEVTYPE_WIPEGEN 			ED_BASE+16L
#define ED_DEVTYPE_MIXER_AUDIO 		ED_BASE+17L
#define ED_DEVTYPE_CG 				ED_BASE+18L
#define ED_DEVTYPE_TBC 				ED_BASE+19L
#define ED_DEVTYPE_TCG 				ED_BASE+20L
#define ED_DEVTYPE_GPI 				ED_BASE+21L
#define ED_DEVTYPE_JOYSTICK 		ED_BASE+22L
#define ED_DEVTYPE_KEYBOARD			ED_BASE+23L

// returns mfr-specific ID from external device.
#define ED_DEVCAP_EXTERNAL_DEVICE_ID	ED_BASE+24L

#define ED_DEVCAP_TIMECODE_READ		ED_BASE+25L
#define ED_DEVCAP_TIMECODE_WRITE	ED_BASE+26L
//	used for seekable non-timecode enabled devices
#define ED_DEVCAP_CTLTRK_READ		ED_BASE+27L
//	used for seekable non-timecode enabled devices
#define ED_DEVCAP_INDEX_READ		ED_BASE+28L

// returns device preroll time in current time format
#define ED_DEVCAP_PREROLL			ED_BASE+29L
// returns device postroll time in current time format
#define ED_DEVCAP_POSTROLL			ED_BASE+30L

// returns indication of device’s synchronization accuracy.
#define ED_DEVCAP_SYNC_ACCURACY		ED_BASE+31L	// returns one of the following:
#define ED_SYNCACC_PRECISE			ED_BASE+32L
#define ED_SYNCACC_FRAME			ED_BASE+33L
#define ED_SYNCACC_ROUGH			ED_BASE+34L

// returns device’s normal framerate.
#define ED_DEVCAP_NORMAL_RATE	ED_BASE+35L	// returns one of the following:
#define ED_RATE_24				ED_BASE+36L
#define ED_RATE_25				ED_BASE+37L
#define ED_RATE_2997			ED_BASE+38L
#define ED_RATE_30				ED_BASE+39L

#define ED_DEVCAP_CAN_PREVIEW	ED_BASE+40L
#define ED_DEVCAP_CAN_MONITOR_SOURCES	ED_BASE+41L

// indicates implementation allows testing of methods/parameters by
// setting the hi bit of a parm that makes sense - see individual methods
// for details.
#define ED_DEVCAP_CAN_TEST			ED_BASE+42L
	
// indicates device accepts video as an input.
#define ED_DEVCAP_VIDEO_INPUTS		ED_BASE+43L

// indicates device accepts audio as an input.
#define ED_DEVCAP_AUDIO_INPUTS		ED_BASE+44L

#define ED_DEVCAP_NEEDS_CALIBRATING	ED_BASE+45L

#define ED_DEVCAP_SEEK_TYPE			ED_BASE+46L	// returns one of the following:
#define ED_SEEK_PERFECT				ED_BASE+47L	// indicates device can execute seek 
												// within 1 video frames without signal 
												//	break (like a DDR)
#define ED_SEEK_FAST				ED_BASE+48L	// indicates device can move pretty quick 
												//  with short break in signal
#define ED_SEEK_SLOW				ED_BASE+49L	// seeks like a tape transport

#define ED_POWER_ON					ED_BASE+50L
#define ED_POWER_OFF				ED_BASE+51L
#define ED_POWER_STANDBY			ED_BASE+52L

#define ED_ACTIVE					ED_BASE+53L
#define ED_INACTIVE 				ED_BASE+54L
#define ED_ALL						ED_BASE+55L
#define ED_TEST						ED_BASE+56L

//	IAMExtTransport Capability Items:  unless otherwise specified, these items return 
//	   OATRUE or OAFALSE.  All return values are in pdwValue unless otherwise specified:

#define ED_TRANSCAP_CAN_EJECT			ED_BASE+100L
#define ED_TRANSCAP_CAN_BUMP_PLAY		ED_BASE+101L	// variable speed for synchronizing
#define ED_TRANSCAP_CAN_PLAY_BACKWARDS	ED_BASE+102L	// servo locked for use during an edit
#define ED_TRANSCAP_CAN_SET_EE			ED_BASE+103L	// show device’s input on its output
#define ED_TRANSCAP_CAN_SET_PB			ED_BASE+104L	// show media playback on device’s output
#define ED_TRANSCAP_CAN_DELAY_VIDEO_IN	ED_BASE+105L	// transport can do delayed-in video edits
#define ED_TRANSCAP_CAN_DELAY_VIDEO_OUT	ED_BASE+106L	// transport can do delayed-out video edits
#define ED_TRANSCAP_CAN_DELAY_AUDIO_IN	ED_BASE+107L	// transport can do delayed-in audio edits
#define ED_TRANSCAP_CAN_DELAY_AUDIO_OUT	ED_BASE+108L	// transport can do delayed-out audio edits
#define ED_TRANSCAP_FWD_VARIABLE_MAX	ED_BASE+109L	// max forward speed (multiple of play speed) 
														//  in pdblValue
#define ED_TRANSCAP_FWD_VARIABLE_MIN	ED_BASE+800L	// min forward speed (multiple of play speed) 
														//  in pdblValue
#define ED_TRANSCAP_REV_VARIABLE_MAX	ED_BASE+110L	// max reverse speed (multiple of play speed) in
														//  pdblValue
#define ED_TRANSCAP_REV_VARIABLE_MIN	ED_BASE+801L	// min reverse speed (multiple of play speed)
														//  in pdblValue
#define ED_TRANSCAP_FWD_SHUTTLE_MAX		ED_BASE+802L	// max forward speed in Shuttle mode (multiple
														//  of play speed) in pdblValue
#define ED_TRANSCAP_FWD_SHUTTLE_MIN		ED_BASE+803L	// min forward speed in Shuttle mode (multiple
														//  of play speed) in pdblValue
#define ED_TRANSCAP_REV_SHUTTLE_MAX		ED_BASE+804L	// max reverse speed in Shuttle mode (multiple
														//  of play speed) in pdblValue
#define ED_TRANSCAP_REV_SHUTTLE_MIN		ED_BASE+805L	// min reverse speed in Shuttle mode (multiple
														//  of play speed) in pdblValue
#define ED_TRANSCAP_NUM_AUDIO_TRACKS	ED_BASE+111L	// returns number of audio tracks
#define ED_TRANSCAP_LTC_TRACK			ED_BASE+112L	// returns track number of LTC timecode track.
														//  ED_ALL means no dedicated timecode track
#define ED_TRANSCAP_NEEDS_TBC			ED_BASE+113L	// device’s output not stable
#define ED_TRANSCAP_NEEDS_CUEING		ED_BASE+114L	// device must be cued prior to performing edit
#define ED_TRANSCAP_CAN_INSERT			ED_BASE+115L
#define ED_TRANSCAP_CAN_ASSEMBLE		ED_BASE+116L
#define ED_TRANSCAP_FIELD_STEP			ED_BASE+117L	// device responds to Frame Advance command by 
														//  advancing one field
#define ED_TRANSCAP_CLOCK_INC_RATE		ED_BASE+118L	// VISCA command - keep for compatibility
#define ED_TRANSCAP_CAN_DETECT_LENGTH	ED_BASE+119L
#define ED_TRANSCAP_CAN_FREEZE			ED_BASE+120L
#define ED_TRANSCAP_HAS_TUNER			ED_BASE+121L
#define ED_TRANSCAP_HAS_TIMER			ED_BASE+122L
#define ED_TRANSCAP_HAS_CLOCK			ED_BASE+123L
#define ED_TRANSCAP_MULTIPLE_EDITS		ED_BASE+806L	// OATRUE means device/filter can support
														//  multiple edit events
#define ED_TRANSCAP_IS_MASTER			ED_BASE+807L	// OATRUE means device is the master clock
														//  for synchronizing (this sets timecode-to-
														//  reference clock offset for editing)
#define ED_TRANSCAP_HAS_DT				ED_BASE+814L	// OATRUE means device has Dynamic Tracking

//	IAMExtTransport Media States
#define ED_MEDIA_SPIN_UP			ED_BASE+130L
#define ED_MEDIA_SPIN_DOWN			ED_BASE+131L
#define ED_MEDIA_UNLOAD				ED_BASE+132L

//	IAMExtTransport Modes
#define	ED_MODE_PLAY				ED_BASE+200L
#define	ED_MODE_STOP				ED_BASE+201L
#define	ED_MODE_FREEZE				ED_BASE+202L	// really "pause"
#define	ED_MODE_THAW				ED_BASE+203L
#define	ED_MODE_FF					ED_BASE+204L
#define	ED_MODE_REW					ED_BASE+205L
#define	ED_MODE_RECORD				ED_BASE+206L
#define	ED_MODE_RECORD_STROBE		ED_BASE+207L
#define ED_MODE_RECORD_FREEZE		ED_BASE+808L	// never "put", only "get"
#define	ED_MODE_STEP				ED_BASE+208L	// same as "jog"
#define	ED_MODE_STEP_FWD			ED_BASE+208L	// same as ED_MODE_STEP
#define	ED_MODE_STEP_REV			ED_BASE+809L
#define	ED_MODE_SHUTTLE				ED_BASE+209L
#define	ED_MODE_EDIT_CUE			ED_BASE+210L
#define ED_MODE_VAR_SPEED			ED_BASE+211L
#define ED_MODE_PERFORM				ED_BASE+212L	// returned status only
#define	ED_MODE_LINK_ON				ED_BASE+280L
#define	ED_MODE_LINK_OFF			ED_BASE+281L
#define ED_MODE_NOTIFY_ENABLE		ED_BASE+810L
#define ED_MODE_NOTIFY_DISABLE		ED_BASE+811L
#define ED_MODE_SHOT_SEARCH			ED_BASE+812L

//	IAMTimecodeReader/Generator/Display defines
//
// Timecode Generator Mode params and values:
//
#define ED_TCG_TIMECODE_TYPE		ED_BASE+400L	// can be one of the following:
#define ED_TCG_SMPTE_LTC			ED_BASE+401L
#define ED_TCG_SMPTE_VITC			ED_BASE+402L
#define ED_TCG_MIDI_QF				ED_BASE+403L
#define ED_TCG_MIDI_FULL			ED_BASE+404L

#define ED_TCG_FRAMERATE			ED_BASE+405L	// can be one of the following:
#define ED_FORMAT_SMPTE_30			ED_BASE+406L
#define ED_FORMAT_SMPTE_30DROP		ED_BASE+407L
#define ED_FORMAT_SMPTE_25			ED_BASE+408L
#define ED_FORMAT_SMPTE_24			ED_BASE+409L

#define ED_TCG_SYNC_SOURCE			ED_BASE+410L	// can be one of the following:
#define ED_TCG_VIDEO				ED_BASE+411L
#define ED_TCG_READER				ED_BASE+412L
#define ED_TCG_FREE					ED_BASE+413L

#define ED_TCG_REFERENCE_SOURCE		ED_BASE+414L	// can have one these values:
													//	ED_TCG_FREE || ED_TCG_READER 
													//	(for regen/jamsync)

// TimeCodeReader Mode params and values:
#define ED_TCR_SOURCE			ED_BASE+416L	// can be one of the following:
// ED_TCG (already defined)
#define ED_TCR_LTC				ED_BASE+417L
#define ED_TCR_VITC				ED_BASE+418L
#define ED_TCR_CT				ED_BASE+419L	// Control Track
#define ED_TCR_FTC				ED_BASE+420L	// File TimeCode - for file-based devices
												//  that wish they were transports
// ED_MODE_NOTIFY_ENABLE can be OATRUE or OAFALSE (defined in transport mode
//  section of this file).  
#define ED_TCR_LAST_VALUE		ED_BASE+421L	// for notification mode - 
												//  successive calls to GetTimecode
												//  return the last read value
// TimeCode Display Mode params and values:
//
#define ED_TCD_SOURCE			ED_BASE+422L	// can be one of the following:
#define ED_TCR					ED_BASE+423L
#define ED_TCG					ED_BASE+424L

#define ED_TCD_SIZE				ED_BASE+425L	// can be one of the following:
#define ED_SMALL				ED_BASE+426L
#define ED_MED					ED_BASE+427L
#define ED_LARGE				ED_BASE+428L

#define ED_TCD_POSITION			ED_BASE+429L	// can be one of the following:
#define ED_TOP					0x0001
#define ED_MIDDLE				0x0002
#define ED_BOTTOM				0x0004			// or’d  with
#define ED_LEFT					0x0100
#define ED_CENTER				0x0200
#define ED_RIGHT				0x0400

#define ED_TCD_INTENSITY		ED_BASE+436L	// can be one of the following:
#define ED_HIGH					ED_BASE+437L
#define ED_LOW					ED_BASE+438L

#define ED_TCD_TRANSPARENCY		ED_BASE+439L	// 0-4, 0 is opaque

#define ED_TCD_INVERT			ED_BASE+440L	// OATRUE=black on white
												// OAFALSE=white on black
//	IAMExtTransport defines
//
// Transport status, params and values
//

// IAMExtTransport Status items and and values:
#define ED_MODE					ED_BASE+500L	// see ED_MODE_xxx values above
#define	ED_ERROR				ED_BASE+501L
#define	ED_LOCAL				ED_BASE+502L
#define	ED_RECORD_INHIBIT		ED_BASE+503L
#define	ED_SERVO_LOCK			ED_BASE+504L
#define	ED_MEDIA_PRESENT		ED_BASE+505L
#define	ED_MEDIA_LENGTH			ED_BASE+506L
#define	ED_MEDIA_SIZE			ED_BASE+507L
#define	ED_MEDIA_TRACK_COUNT	ED_BASE+508L
#define	ED_MEDIA_TRACK_LENGTH	ED_BASE+509L
#define	ED_MEDIA_SIDE			ED_BASE+510L

#define	ED_MEDIA_TYPE			ED_BASE+511L	// can be one of the following:
#define	ED_MEDIA_VHS			ED_BASE+512L
#define	ED_MEDIA_SVHS			ED_BASE+513L
#define	ED_MEDIA_HI8			ED_BASE+514L
#define	ED_MEDIA_UMATIC			ED_BASE+515L
#define	ED_MEDIA_DVC			ED_BASE+516L
#define	ED_MEDIA_1_INCH			ED_BASE+517L
#define	ED_MEDIA_D1				ED_BASE+518L
#define	ED_MEDIA_D2				ED_BASE+519L
#define	ED_MEDIA_D3				ED_BASE+520L
#define	ED_MEDIA_D5				ED_BASE+521L
#define	ED_MEDIA_DBETA			ED_BASE+522L
#define	ED_MEDIA_BETA			ED_BASE+523L
#define	ED_MEDIA_8MM			ED_BASE+524L
#define	ED_MEDIA_DDR			ED_BASE+525L
#define	ED_MEDIA_SX				ED_BASE+813L
#define	ED_MEDIA_OTHER			ED_BASE+526L
#define	ED_MEDIA_CLV			ED_BASE+527L
#define	ED_MEDIA_CAV			ED_BASE+528L
#define ED_MEDIA_POSITION		ED_BASE+529L

#define ED_LINK_MODE			ED_BASE+530L	// OATRUE if transport controls
							 					// are linked to graph's RUN, 
							 					// STOP, and PAUSE methods

// IAMExtTransport Basic Parms
#define	ED_TRANSBASIC_TIME_FORMAT	ED_BASE+540L	// can be one of the following:
#define	ED_FORMAT_MILLISECONDS		ED_BASE+541L
#define	ED_FORMAT_FRAMES			ED_BASE+542L
#define ED_FORMAT_REFERENCE_TIME	ED_BASE+543L

#define	ED_FORMAT_HMSF				ED_BASE+547L
#define	ED_FORMAT_TMSF				ED_BASE+548L

#define	ED_TRANSBASIC_TIME_REFERENCE	ED_BASE+549L	// can be one of the following:
#define	ED_TIMEREF_TIMECODE			ED_BASE+550L
#define	ED_TIMEREF_CONTROL_TRACK	ED_BASE+551L
#define	ED_TIMEREF_INDEX			ED_BASE+552L

#define	ED_TRANSBASIC_SUPERIMPOSE		ED_BASE+553L	// enable/disable onscreen display
#define	ED_TRANSBASIC_END_STOP_ACTION	ED_BASE+554L	// can be one of: ED_MODE_STOP |
														//	ED_MODE_REWIND | ED_MODE_FREEZE
#define	ED_TRANSBASIC_RECORD_FORMAT	ED_BASE+555L	// can be one of the following:
#define	ED_RECORD_FORMAT_SP			ED_BASE+556L
#define	ED_RECORD_FORMAT_LP			ED_BASE+557L
#define	ED_RECORD_FORMAT_EP			ED_BASE+558L

#define	ED_TRANSBASIC_STEP_COUNT	ED_BASE+559L
#define	ED_TRANSBASIC_STEP_UNIT		ED_BASE+560L	// can be one of the following:
#define	ED_STEP_FIELD				ED_BASE+561L
#define	ED_STEP_FRAME				ED_BASE+562L
#define	ED_STEP_3_2					ED_BASE+563L

#define	ED_TRANSBASIC_PREROLL		ED_BASE+564L
#define	ED_TRANSBASIC_RECPREROLL	ED_BASE+565L
#define	ED_TRANSBASIC_POSTROLL		ED_BASE+566L
#define	ED_TRANSBASIC_EDIT_DELAY	ED_BASE+567L
#define	ED_TRANSBASIC_PLAYTC_DELAY	ED_BASE+568L
#define	ED_TRANSBASIC_RECTC_DELAY	ED_BASE+569L
#define ED_TRANSBASIC_EDIT_FIELD	ED_BASE+570L
#define	ED_TRANSBASIC_FRAME_SERVO	ED_BASE+571L
#define	ED_TRANSBASIC_CF_SERVO		ED_BASE+572L
#define	ED_TRANSBASIC_SERVO_REF		ED_BASE+573L	// can be one of the following:
#define	ED_REF_EXTERNAL				ED_BASE+574L
#define	ED_REF_INPUT				ED_BASE+575L
#define	ED_REF_INTERNAL				ED_BASE+576L
#define	ED_REF_AUTO					ED_BASE+577L

#define	ED_TRANSBASIC_WARN_GL		ED_BASE+578L
#define	ED_TRANSBASIC_SET_TRACKING	ED_BASE+579L	// can be one of the following:
#define	ED_TRACKING_PLUS			ED_BASE+580L
#define	ED_TRACKING_MINUS			ED_BASE+581L
#define	ED_TRACKING_RESET			ED_BASE+582L

#define	ED_TRANSBASIC_SET_FREEZE_TIMEOUT	ED_BASE+583L
#define	ED_TRANSBASIC_VOLUME_NAME		ED_BASE+584L
#define	ED_TRANSBASIC_BALLISTIC_1		ED_BASE+585L	// space for proprietary data
#define	ED_TRANSBASIC_BALLISTIC_2		ED_BASE+586L
#define	ED_TRANSBASIC_BALLISTIC_3		ED_BASE+587L
#define	ED_TRANSBASIC_BALLISTIC_4		ED_BASE+588L
#define	ED_TRANSBASIC_BALLISTIC_5		ED_BASE+589L
#define	ED_TRANSBASIC_BALLISTIC_6		ED_BASE+590L
#define	ED_TRANSBASIC_BALLISTIC_7		ED_BASE+591L
#define	ED_TRANSBASIC_BALLISTIC_8		ED_BASE+592L
#define	ED_TRANSBASIC_BALLISTIC_9		ED_BASE+593L
#define	ED_TRANSBASIC_BALLISTIC_10		ED_BASE+594L
#define	ED_TRANSBASIC_BALLISTIC_11		ED_BASE+595L
#define	ED_TRANSBASIC_BALLISTIC_12		ED_BASE+596L
#define	ED_TRANSBASIC_BALLISTIC_13		ED_BASE+597L
#define	ED_TRANSBASIC_BALLISTIC_14		ED_BASE+598L
#define	ED_TRANSBASIC_BALLISTIC_15		ED_BASE+599L
#define	ED_TRANSBASIC_BALLISTIC_16		ED_BASE+600L
#define	ED_TRANSBASIC_BALLISTIC_17		ED_BASE+601L
#define	ED_TRANSBASIC_BALLISTIC_18		ED_BASE+602L
#define	ED_TRANSBASIC_BALLISTIC_19		ED_BASE+603L
#define	ED_TRANSBASIC_BALLISTIC_20		ED_BASE+604L

// consumer VCR items
#define	ED_TRANSBASIC_SETCLOCK			ED_BASE+605L
#define	ED_TRANSBASIC_SET_COUNTER_FORMAT	ED_BASE+606L	// uses time format flags
#define	ED_TRANSBASIC_SET_COUNTER_VALUE	ED_BASE+607L

#define	ED_TRANSBASIC_SETTUNER_CH_UP	ED_BASE+608L
#define	ED_TRANSBASIC_SETTUNER_CH_DN	ED_BASE+609L
#define	ED_TRANSBASIC_SETTUNER_SK_UP	ED_BASE+610L
#define	ED_TRANSBASIC_SETTUNER_SK_DN	ED_BASE+611L
#define	ED_TRANSBASIC_SETTUNER_CH		ED_BASE+612L
#define	ED_TRANSBASIC_SETTUNER_NUM		ED_BASE+613L

#define	ED_TRANSBASIC_SETTIMER_EVENT	ED_BASE+614L
#define	ED_TRANSBASIC_SETTIMER_STARTDAY	ED_BASE+615L
#define	ED_TRANSBASIC_SETTIMER_STARTTIME	ED_BASE+616L
#define	ED_TRANSBASIC_SETTIMER_STOPDAY	ED_BASE+617L
#define	ED_TRANSBASIC_SETTIMER_STOPTIME	ED_BASE+618L

// IAMExtTransport video parameters
#define	ED_TRANSVIDEO_SET_OUTPUT	ED_BASE+630L	// can be one of the following:
#define	ED_E2E						ED_BASE+631L
#define	ED_PLAYBACK					ED_BASE+632L
#define	ED_OFF						ED_BASE+633L

#define	ED_TRANSVIDEO_SET_SOURCE	ED_BASE+634L

// IAMExtTransport audio parameters
#define	ED_TRANSAUDIO_ENABLE_OUTPUT	ED_BASE+640L	// can be the following:
#define	ED_AUDIO_ALL				0x10000000	//	or any of the following OR'd together
#define ED_AUDIO_1					0x0000001L
#define ED_AUDIO_2					0x0000002L
#define ED_AUDIO_3					0x0000004L
#define ED_AUDIO_4					0x0000008L
#define ED_AUDIO_5					0x0000010L
#define ED_AUDIO_6					0x0000020L
#define ED_AUDIO_7					0x0000040L
#define ED_AUDIO_8					0x0000080L
#define ED_AUDIO_9					0x0000100L
#define ED_AUDIO_10					0x0000200L
#define ED_AUDIO_11					0x0000400L
#define ED_AUDIO_12					0x0000800L
#define ED_AUDIO_13					0x0001000L
#define ED_AUDIO_14					0x0002000L
#define ED_AUDIO_15					0x0004000L
#define ED_AUDIO_16					0x0008000L
#define ED_AUDIO_17					0x0010000L
#define ED_AUDIO_18					0x0020000L
#define ED_AUDIO_19					0x0040000L
#define ED_AUDIO_20					0x0080000L
#define ED_AUDIO_21					0x0100000L
#define ED_AUDIO_22					0x0200000L
#define ED_AUDIO_23					0x0400000L
#define ED_AUDIO_24					0x0800000L
#define ED_VIDEO					0x2000000L	// for Edit props below

#define	ED_TRANSAUDIO_ENABLE_RECORD		ED_BASE+642L
#define	ED_TRANSAUDIO_ENABLE_SELSYNC	ED_BASE+643L
#define	ED_TRANSAUDIO_SET_SOURCE		ED_BASE+644L
#define	ED_TRANSAUDIO_SET_MONITOR		ED_BASE+645L


// Edit Property Set-related defs

// The following values reflect (and control) the state of an 
// edit property set
#define ED_INVALID		ED_BASE+652L
#define ED_EXECUTING	ED_BASE+653L
#define ED_REGISTER		ED_BASE+654L
#define ED_DELETE		ED_BASE+655L

// Edit property set parameters and values
#define ED_EDIT_HEVENT	ED_BASE+656L	// event handle to signal event 
										// completion
#define ED_EDIT_TEST	ED_BASE+657L	// returns OAFALSE if filter thinks
										//  edit can be done, OATRUE if not
#define ED_EDIT_IMMEDIATE	ED_BASE+658L	// OATRUE means start put the 
										// device into edit mode (editing
										// "on the fly") immediately upon
										//  execution of Mode(ED_MODE_EDIT_CUE)
#define ED_EDIT_MODE	ED_BASE+659L
// can be one of the following values:
#define ED_EDIT_MODE_ASSEMBLE		ED_BASE+660L
#define ED_EDIT_MODE_INSERT			ED_BASE+661L
#define ED_EDIT_MODE_CRASH_RECORD	ED_BASE+662L
#define ED_EDIT_MODE_BOOKMARK_TIME	ED_BASE+663L		// these two are for
#define ED_EDIT_MODE_BOOKMARK_CHAPTER	ED_BASE+664L	// laserdisks

#define ED_EDIT_MASTER	ED_BASE+666L	// OATRUE causes device 
										//  not to synchronize

#define ED_EDIT_TRACK		ED_BASE+667L
// can be one of the following possible OR'd values:
//	ED_VIDEO, ED_AUDIO_1 thru ED_AUDIO_24 (or ED_AUDIO_ALL)

#define ED_EDIT_SRC_INPOINT		ED_BASE+668L	// in current time format
#define ED_EDIT_SRC_OUTPOINT	ED_BASE+669L	// in current time format
#define ED_EDIT_REC_INPOINT		ED_BASE+670L	// in current time format
#define ED_EDIT_REC_OUTPOINT	ED_BASE+671L	// in current time format

#define ED_EDIT_REHEARSE_MODE	ED_BASE+672L
// can be one of the following possible values:
#define ED_EDIT_BVB		ED_BASE+673L	// means rehearse the edit with 
										//  "black-video-black"
#define ED_EDIT_VBV		ED_BASE+674L
#define ED_EDIT_VVV		ED_BASE+675L
#define ED_EDIT_PERFORM	ED_BASE+676L	// means perform the edit with no 
										//  rehearsal.

// Set this property to OATRUE to kill the edit if in progress
#define ED_EDIT_ABORT	ED_BASE+677L
// how long to wait for edit to complete
#define ED_EDIT_TIMEOUT	ED_BASE+678L		// in current time format

// This property causes the device to seek to a point specified by
// ED_EDIT_SEEK_MODE (see below).  NOTE: Only one event at a time can seek.
#define ED_EDIT_SEEK		ED_BASE+679L	// OATRUE means do it now.  
#define ED_EDIT_SEEK_MODE	ED_BASE+680L
//possible values:
#define ED_EDIT_SEEK_EDIT_IN	ED_BASE+681L	// seek to edit's inpoint
#define ED_EDIT_SEEK_EDIT_OUT	ED_BASE+682L	// seek to edit's outpoint
#define ED_EDIT_SEEK_PREROLL	ED_BASE+683L	// seek to edit's 
												//  inpoint-preroll
#define ED_EDIT_SEEK_PREROLL_CT	ED_BASE+684L	// seek to preroll point 
							// using control track (used for tapes with 
							// discontinuoustimecode before edit point: seek
							// to inpoint using timecode, then backup to 
							// preroll point using control track)
#define ED_EDIT_SEEK_BOOKMARK	ED_BASE+685L	// seek to bookmark (just like 
												//  timecode search)
// This property is used for multiple-VCR systems where each machine must
//  cue to a different location relative to the graph's reference clock.  The
//  basic idea is that an edit event is setup with an ED_EDIT_OFFSET property
//  that tells the VCR what offset to maintain between it's timecode (converted
//	to reference clock units) and the reference clock.
#define ED_EDIT_OFFSET	ED_BASE+686L		// in current time format

#define ED_EDIT_PREREAD	ED_BASE+815L		// OATRUE means device supports
											//  pre-read (recorder can also be
											//  player

//
// Some error codes:
// 
// device could be in local mode
#define ED_ERR_DEVICE_NOT_READY		ED_BASE+700L

#endif // __EDEVDEFS__

// eof edevdefs.h
